EZ Double Leg repair kits

SlantDouble Leg

Repair the front and rear posts with a kit that follows the frame’s continuous angled front leg.

Yellow Slant Double Leg repair kit
Shown in yellow. Colors and dimensions vary by project.
Made in the USALifetime impact warrantyEngineering documentation available

Explore the EZ Double Leg

Slant Double Leg

See the angled front leg, then watch the front and rear connections fasten to the frame.

Skip to product details
Front · 4 bolts
Slant Double Leg repair kit
Scroll to rotate and separate the kit and connect the blue rack frame. The front connection has four upper bolts and a welded lower joint. The rear has four upper bolts and two lower through-bolts. Each inward-extending footplate has four holes with two diagonally opposite anchors. Close-ups show the front and rear connections tightening, then the existing frame strut bolting back onto the kit. Anchoring comes last: the front and rear footplates each get a close-up as the anchors descend and their washers and nuts tighten.
Scroll to explore ↓
Continue ↓

Illustrative product view. Configurations vary by rack and project.

Built around your frame

Follow the angle of the frame.

The Slant Double Leg uses a continuous sloped front leg below the upper connection. The repair follows that geometry while replacing the damaged lower sections of both posts.

Full specifications, warranty & FAQs
Continuous front-leg angle
The front leg’s slope and connection height are checked against the original frame.
Frame depth and clearance
The lower frame width, footplate positions, and aisle clearance are reviewed together.
Retained rack connections
Original beam connectors and frame strut attachments are included in the fit review.
Made in the USA
Lifetime impact warranty coverage and stamped engineering calculations are available under the project’s applicable terms.

Have a damaged slant frame?

Send photos of the full frame, both damaged posts, footplates, anchors, and surrounding bay. We’ll help confirm the right repair.